ECM fans provide quiet energy efficient airflows and closed loop feedback for automated adjustment of downflow velocity counteracting filter loading.
ECM Closed loop controls not available for all configurations.
Sounds levels are <70dbA measured in free field conditions for booths less than 1.2m & 1.6m deep.
Sounds levels are <75dbA measured in free field conditions for booths less than 2.0m & 2.4m deep.
All sound measurement is carried out in free field with clean filters and without sound foam, measured sound levels will increase if the DFB is placed in an enclosed room.
Knife edge gel sealed filters or gasket sealed diffusers allow for 'rapid tool-less replacement' within the booth.
Variety of standard filtration options can be selected depending on final client application, dust burden level.
The booth internal area is designed to allow access for filter changing without the need for special tools.
Top or front bleed options are provided to allow bleed outs into the room or ducted out as per process requirements.
Flush mounted light fixtures in the booth side walls allows minimum distance between ceiling HEPA filters / diffusers, facilitating improved airflow characteristics and removes traditional unsightly tear drop style lighting.
Light diffusers provided are optimized to provide minimal glare and sufficient lighting within the process zone.
Isocide™ anti-microbial powder coating for all powder coated panels.
Our selection of 3 core control systems fits every process need. Sola Basic-our basic microprocessor embedded system with open loop AC Controls. Sola Atex-Our hazardous rated system with push buttons Atex & NEC 505 compliant. Sola Legacy-Our HMI/PLC control system with closed loop ECM controls and optional 21 CFR Part 11.
Dual Airflow mode can be factory ordered for re-circulatory and local exhaust when handling small volumes of chemicals and/or volatile powders.
When the safe change filter option is purchased, the reversible filter housing design allows adaptability on site, whether to construct the booth with internal or external filter access.
Return grilles are inbuilt with pre-filter shelving allowing retrofitting when bulk powders are handled in the future.
In event that hazardous powders might be handled in the future our SCNB series can be selected to allow future upgrading for safe change filter housings by simply ordering additional bags and BIBO rings.
Cooling coils, utilizing Chilled water, Glycol or Direct Expansion can be fitted allowing automatic regulation of the booth internal temperature.
Controlled via a thermostat with temperature and humidity indication allows simple setting. Alarm limits can be set dependant on the required process parameters.
1D or 5D High Containment Screens can be ordered. 5D Containment screens can be retrofitted on all DFB G2 Models.